User

Good afternoon, Bottom line up front: EVO-ALL won't start my 2013 Hyundai Elantra GT push to start. Details:I recently purchased an EVO-ALL to use as a remote start solution, without requiring a separate remote starter add-on (the website shows I can use it this way for my vehicle). I also purchased a Flashlink unit to update the EVO-ALL to the latest stable/recommended version, without issues. Using the Fortin diagram for wiring, it appears that several wires that would be connected to a remote starter simply aren't connected at all, such as the starter wire, parking lights, etc. I successfully programmed the EVO-ALL for my 2014 Hyundai Elantra GT, and connected the wires as per the Fortin guide. I also consulted the Wirecolor guide, which showed both those same wires that I connected, as well as the seemingly unneeded wires that would connect to a remote starter. Using the Fortin install guide, I successfully programmed the EVO-ALL when it was connected to my vehicle, but it will not remote start my vehicle. When I push the lock button, the blue LED lights up. When I push the OEM keyfob 3x times, the red LED lights up, then the yellow LED lights up, then nothing at all. The vehicle doesn't start. No ignition, no crank, no start....nothing but LED activity on the EVO-ALL and door locks. I've used the online troubleshooting guide, and that didn't provide any helpful solutions. Do you have any idea why this might be the case? Are those wires that I didn't connect still required, since I am not using a separate remote starter? If so, how do I connect them? The Fortin install guide assumes the user has a remote starter, and doesn't provide wiring instructions for someone who is NOT using one. The Wirecolor install guide also assumes the user has a separate remote starter module. Thanks in advance for your assistance with this. My wife is eagerly awating her birthday present! **By the way....I have the exact same problem with a second EVO-ALL for my 2014 Hyundai Santa Fe PTS...same issue, same circumstances, same result (won't start). I didn't want to make another post for this one, but he service number for this EVO-ALL is 001A06430027.